2016 Seascape 24 Technical Specs
General Data about Seascape 24
| Brand | Seascape |
| Model | 24 |
| Boat Type | Sail |
| Category | Cruiser/Racer |
| Year Of Production | 2016 |
| Condition (New/Used) | Pre-Owned (Used) |
| Country | Plymouth, Devon, United Kingdom |
| Fuel (Gas/Diesel) | Gas |
| Hull Material Used | Fiberglass |
| Length | 7.32 m / (24.00 ft) |
| Selling Price | 54.950 (GBP) |
| Vat Status | All taxes paid |
| Service repair manual | Seascape 24 Manual |
Dimensions And Wieght
| Minimum Draft | 0.25 Meters / (0 feet and 10 inch) |
| LOA (Length Overall) | 7.29 Meters / (23 feet and 11 inch) |
| Displacement (Weight) | 1962 lbs / (890 kg) |
| Boat Keel Type | lifting |
| Parts And Accessories | Seascape 24 Parts |
| Beam Width | 2.49 Meters / (8 feet and 2 inch) |
Detailed Specifications
| Number of Heads (Watercraft) | 1 |
| Compliance And Certifications | CE-Certification |
Features And Equipments
Safety Features
| Horseshoe lifebuoy |
Other Equipments
| pigouts padded rail coves |
| Wireless speed, depth, wind and nmea system |
| Windex at masthead |
| Winch handle |
| Volt meter in switch panel |
| Two tapered spinnaker sheets |
| T121 hull transmitter |
| T120 wireless wind transmitter |
| T112 analogue wind wireless display |
| T111 dual line multifunctional wireless display |
| T110 single line multifunctional wireless display |
| Spliced dyneema ropes with hooks for aft support |
| Serviced may 2021 |
| P79 in hull depth transducer |
| One spinnaker tack line |
| One dyneema jib halyard |
| One dyneema fractional spinnaker halyard |
| One bowsprit control line |
| One 1:8 cunningham control line |
| One 1:2 dyneema main halyard |
| North sails gennaker – 63m2,norlon 75, red |
| Nasa bm1 battery monitor |
| Lightweight aluminium powder coated a-frame |
| Lift the boat with the mast in |
| Keel edges are protected with epoxy primer |
| Interior indirect led lighting |
| Garmin mounted on adjustable swing out bracket |
| Fenders and warps |
| Enables stepping of the mast without a crane |
| Dyneema jib halyard, |
| Double usb outlet |
| Custom 3 part lifting strop |
| Chemical toilet |
| Centre lift point above the centreboard |
| Built in garmin chart uk and ireland maps |
| Bucket |
| Boom with 1:8 outhaul and two reefs |
| Anchor chain and warp |
| Agm 12v/33ah battery |
| Additional pulpit of the same height |
| Actisense nmea0183 to nmea2000 converter |
| 45cm high pushpit and stanchions |
| 4 seascape branded (inch)crew(inch) storage bags |
| 230v shorepower system |
| 230v outlet in cabin |
| 230v battery charger |
| 2 seascape branded rope bags |
| 2 ronstan jib tracks with blocks on coachroof |
| 2 harken sta20 winches on the coachroof |
| 12v outlet |
Exterior Features
| Transport straps with pads and light board |
| Spare tyre |
| Padded rudder bags |
| Mast, boom, spreaders and shroud transport covers |
| Mainsail cover |
| Jib sock zip up cover |
| Integrated brake drum flushing system |
| Custom grp cradles |
Deck Hardware
| Uprated ronstan ratchet blocks for spinnaker |
| Stern storage with two access hatches in cockpit |
| Stainless steel bow and stern mooring cleat |
| Spinlock clutches for halyards and control lines |
| Ronstan blocks and cleats for other controls |
| Carbon parts uv lacquer protection |
| Carbon look tiller with ronstan tiller extension |
| Bartels deck furler and swivel |
| 1:12 boom vang |
- Seascape provided us with the latest version of its 24 service repair manual
- Find All mechanical and electrical parts and accessories of Seascape 24 Sail here
